SAUNABITS
Browse the product categories below for your requirements |
|
| Shopping Cart |
| Buying from Saunabits |
Need help? Call us on -
0121 753 1510 |
 |
| This site is monitored by Security Metrics to give you totally safe online shopping. |
|
|
Infrared Sauna Parts |
Control Panel [IRCP] |
 |
The controls have a burst control regulation with a variable setting ranging from 1-10, with a maximum loading of 13amp. Each control panel has a light switch, a pre-heat/power switch. This switches the mains power on.
You can also have the option to switch one or more of your emitters on to give you a background heat before you use your infrared sauna, ideal for leaving on for long periods between your sessions. The panel can be sunk into a cavity or stand semi-proud.
Size (mm) - 285h x 185w
Please note: Correct infrared controls will not give you a temperature reading as a far infrared
element heats up the person and not the air. This is why we have a 1-10 setting, also
the burst control system will not alter the far infrared rays.
|
|
|
Stainless Steel Surround with Emitters [IRST] |
 |
The surround is made out of highly polished stainless steel and is designed to be sunk into your walls. In front of the ceramic infrared emmitters is a stainless steel protective grill. All emitters are pre-wired ready for connection.
Size (mm) - 600 x 250
 There is a choice of ceramic emitter ratings:
150W - for the back and under bench (close to body)
250W - for under bench and roof (away from body)
400W - front of cabin and roof (away from body)
If you are in any doubt, please contact us for advice.
|
|
|
Stainless Steel Surround with Emitters & Wood Surround [IRSTW] |
 |
The surround is made out of highly polished stainless steel and is designed to stand semi-proud with a wood surround. In front of the ceramic infrared emmitters is a stainless steel protective grill. All emitters are pre-wired ready for connection.
Size (mm) - 600 x 250
There is a choice of ceramic emitter ratings:
150W - for the back and under bench (close to body)
250W - for under bench and roof (away from body)
400W - front of cabin and roof (away from body)
If you are in any doubt, please contact us for advice.
|
|
|
Ceramic Connector Block [IRCB] |
 |
A glazed porcelain connector block suitable for high temperature applications (i.e. back of emitters) resistant to ageing.
Tin plated brass screw terminals - 3 way, 10 amp rating
|
|
|
I.E.C. Extension Lead [IRIEC] |
 |
With a moulded 3 pin CEE22 10 amp shrouded plug and socket on either end of a 3 core BASEC approved cable.
Available in 3 lengths.
|
|
|
Split I.E.C. Extension Lead [IRIECS] |
 |
With one socket and two male plugs and 1 metre of cable with 500mm to split.
|
|
|
|
|
